The short answer
Start with the Kalita Wave if you want the most forgiving pour-over. Kalita says its flat bottom, three small holes and wave filter keep water from pooling, for even extraction. Pick the Hario V60 if you want the cheapest entry and the most control over flow ($13.00 for the plastic 02). Pick the Chemex if you brew for two or more; the 6-cup holds 30 oz.
Last updated: November 13, 2026 · By The Brew List editorial team · Research-based comparison, not hands-on tested (see How we researched this)
Quick verdict
| If you… | Get | Why |
|---|---|---|
| Want the most forgiving brewer | Kalita Wave 185 | Flat bed, 3 small holes, 20-wave filter, per Kalita. Kalita Wave 185 Stainless at Seattle Coffee Gear |
| Want the cheapest start and the most control | Hario V60 02 (plastic) | $13.00 at Hario USA; Hario says pour speed changes the body. Hario V60 Plastic Dripper at Seattle Coffee Gear |
| Brew for two or more | Chemex Six Cup Classic | 30 oz capacity, brewer and carafe in one. Chemex Six Cup Classic at Seattle Coffee Gear |
What’s the difference between the V60, Kalita Wave and Chemex?
The shape and the filter. The Hario V60 is a cone with spiral ridges and an open bottom, so your pouring speed controls the brew. The Kalita Wave has a flat bottom with three small holes and a fluted “wave” filter that evens out the flow. The Chemex is an hourglass-shaped glass carafe that uses thick bonded paper filters.
- Hario says the V60’s “conical shape allows for deeper layering of coffee grounds.” It adds that its “spiral ridges and lack of flow restriction” let you pour “quickly for a delicate body, or slowly for a heavier flavor” (hario-usa.com).
- Kalita describes “a unique flat-bottomed coffee bed, three small extraction holes, and a patented wave filter so hot water does not accumulate” (kalitausa.com).
- Chemex says its Bonded filters are “based on laboratory paper,” use “20-30% thicker paper than most of the competition,” and are designed to “remove fats, bitterness, acidity, and sediments that other types of filters leave behind” (chemexcoffeemaker.com).
Side-by-side specs
| Spec (maker source) | Hario V60 02 (plastic) | Kalita Wave 185 (stainless) | Chemex Six Cup Classic (CM-6A) |
|---|---|---|---|
| Shape | Cone, spiral ridges, single large opening | Flat bottom, 3 small holes | Hourglass carafe, cone filter |
| Capacity | 1–4 cups | 2–4 cups | 30 oz (Chemex counts 5 oz per cup) |
| Material | Acrylonitrile-styrene resin (clear) | Stainless steel | Borosilicate glass, wood collar and leather tie |
| Made in | Japan | Japan | Not stated on page; Chemex says each one is “inspected, polished and hand tied” by its team |
| Filters | V60 02 paper filters | Kalita Wave 185 filters (required) | Chemex Bonded FP-1, FC-100, FS-100, FSU-100 |
| Dishwasher | n/a on page | Yes | Yes, after removing the collar and tie |
| Size | W137 × D116 × H102 mm | n/a on page | 8 1/2″ tall, 5 1/8″ diameter |
| List price, Nov 11, 2026 | $13.00 | $42.00 | $49.50 |
Sources: Hario USA V60 Plastic 02, Kalita USA Wave 185, Chemex Six Cup Classic, Chemex Bonded FS-100 filters.
What do the filters cost per brew?
Based on maker list prices, the V60 has the cheapest filters, at about 8.2¢ per brew. The Chemex is 11¢ and the Kalita Wave 13¢. Over a year of daily brewing, that’s a gap of about $17.50 between the cheapest and the most expensive.
| Filter | Pack | List price | Per brew |
|---|---|---|---|
| Hario V60 02 paper filters (white, 100 ct) | 100 | $8.20 | ≈ $0.082 |
| Chemex Bonded FS-100 (pre-folded squares) | 100 (per Chemex) | $11.00 | $0.11 |
| Kalita Wave 185 filters | 100 | $13.00 | $0.13 |
Per-brew figures are our arithmetic from the list prices shown, one filter per brew. Prices are from hario-usa.com, kalitausa.com and chemexcoffeemaker.com, seen November 11, 2026. Check current price
Where to buy
- Hario V60 paper filters, Medium (02), 100 count, at Seattle Coffee Gear (SCG listed $7.76 on Nov 12, 2026)
- Chemex Pre-Folded Square Filters (100) at Seattle Coffee Gear
- Kalita Wave 185 filters at Seattle Coffee Gear (choose the 185 size)
Which pour-over is best for beginners?
The Kalita Wave is usually the easiest place to start. Kalita designed its flat bed and three small holes so water doesn’t pool, which makes results less dependent on perfect pouring. The V60 rewards practice, because Hario says pour speed changes the body. The Chemex is simple to use but makes larger batches and needs a medium-coarse grind.
That matches the consensus in the comparison guides that currently rank for this query: Kalita for forgiveness, V60 for control, Chemex for batches and a clean cup. Use it as a starting point, not a test result.
V60 vs Chemex: which makes a cleaner cup?
Chemex says its thicker Bonded filters remove more “fats, bitterness, acidity and sediments” than other filters, so the Chemex is the usual choice for the cleanest, lightest-bodied cup. With the V60 you can change the body by pouring faster or slower, per Hario. Both use paper, so both filter more than a metal filter or a French press.
Do I need a gooseneck kettle and a grinder?
A gooseneck kettle helps a lot with the V60 and Kalita, because controlled pouring matters. Chemex’s own instructions just say to pour slowly in a circle. A burr grinder matters for all three. Chemex specifies a medium-coarse grind and warns that a too-fine grind slows the flow.
- Kettles: Fellow Stagg EKG alternatives
- Grinders: best burr grinders under $100 or Encore ESP vs Fellow Ode Gen 2
- Scale: best espresso scales (they work for pour-over too)
How to brew a Chemex (maker’s method)
- Grind medium-coarse.
- Fold the filter so the three-layer side covers the spout.
- Dose one rounded tablespoon per 5 oz cup, or more if you like it stronger.
- Bloom. Bring water to a boil, let it stop boiling vigorously, wet the grounds, and wait about 30 seconds.
- Pour slowly, keeping the water level at least a quarter inch below the top.
- Finish, then lift out and compost the filter.
Source: Chemex “How to Use”.
Hario V60: pros and cons
Pros: cheapest to buy ($13.00 plastic 02) and the cheapest filters; most control over flow; made in Japan; also sold in ceramic ($30.50 classic colors) and glass ($29.50 “Surfboard” 02) at Hario USA. Cons: less forgiving of uneven pouring; benefits most from a gooseneck kettle.
Where to buy
Kalita Wave 185: pros and cons
Pros: forgiving flat-bed design; stainless steel and dishwasher safe; brews 2–4 cups. Cons: needs Kalita’s own Wave 185 filters, which cost the most per brew here; Kalita doesn’t list the size on its page.
Where to buy
- Kalita Wave 185 Stainless at Seattle Coffee Gear (choose the 185 size)
Chemex Six Cup Classic: pros and cons
Pros: 30 oz, so it brews for several people; brewer and serving carafe in one; borosilicate glass; dishwasher safe once you remove the collar. Cons: glass can break (Chemex’s warranty doesn’t cover “traumatic breakage”); needs Chemex Bonded filters; Chemex warranty only applies to authorized sellers.
Where to buy
How to decide
- First pour-over, and you want consistency? Kalita Wave 185.
- Want to learn technique and spend the least? Hario V60 02.
- Brew for two or more, or want the cleanest cup? Chemex Six Cup.
- Want a machine to do it? See Moccamaster vs OXO Brew 8-Cup.
FAQ
How many cups does a 6-cup Chemex make?
Chemex lists the Six Cup Classic at 30 oz and measures cups in 5 oz increments. You can brew less than the full capacity by adjusting your recipe.
Which V60 size should I buy?
Hario USA lists the V60 02 at 1–4 cups. That’s the common all-round size for one or two mugs.
Do I have to use Kalita filters in a Kalita Wave?
Kalita says the Wave 185 “requires Kalita Wave 185 filters.” The wave-shaped filter is part of how the brewer controls flow.
Can I use regular filters in a Chemex?
Chemex lists Bonded FP-1, FC-100, FS-100 and FSU-100 filters for the Six Cup Classic and says its paper is 20–30% thicker than most of the competition, so we’d stick with Chemex filters.
Is the Chemex dishwasher safe?
Yes. Chemex says the glass brewer can go in the dishwasher once you remove the wood collar and leather tie. Secure it so it doesn’t bump other dishes.
Which is cheapest to run?
Using maker list prices on November 11, 2026, V60 02 filters cost about 8.2¢ per brew, Chemex Bonded 11¢, and Kalita Wave 185 13¢.
How we researched this
This comparison is research-based. We haven’t tested these brewers hands-on yet. Specs, materials and brewing steps come from Hario USA, Kalita USA and Chemex product pages, checked November 11, 2026. Per-brew filter costs are our arithmetic from maker list prices, with the inputs shown. Beginner-friendliness reflects the makers’ design descriptions and the consensus of currently ranking guides, not our own tasting.
Sources: hario-usa.com V60 Plastic Dripper 02 and filter pages; kalitausa.com Wave 185 Stainless and Wave 185 filters; chemexcoffeemaker.com Six Cup Classic and Bonded FS-100 filter pages.
Related: Fellow Stagg EKG alternatives · Best burr grinders under $100 · Encore ESP vs Fellow Ode Gen 2 · Moccamaster vs OXO Brew 8-Cup · Drip & Pour-Over hub